A 20ft side-opening container gives access along a long side, which can help with wide equipment or retrieving items without working through an end doorway. Compare new one-trip and used conditions, then check the actual door arrangement against your loading plan.
20FT SIDE OPENING
Compare 20ft side-opening conditions
Availability to be confirmed.
Search by size, type, condition, colour or reference. Use arrows for suggestions, Enter to select, Escape to close.
The 50:50 design in the drawing below gives a clear side opening of 5.702m. If your site only leaves room to open part of the side, ask for the width you would get with those leaves open. Check that a long bench on a trolley can turn through that gap.
20ft side opening container loading space
Lay out the width of the trolley or other handling equipment beside the container. Check the door swing against the fence, wall or next store. If using a forklift, have the access route and actual container floor limits assessed for the proposed load.
Used 20ft side opening container checks
Ask to see the side leaves opening, folding back and closing on the offered unit. Get a close-up of the threshold where your equipment will pass and ask for any work to the hinges or locking points to be recorded.
These reference dimensions describe one manufacturer’s 50:50 side-door design. Request matching measurements for the actual unit offered.
20ft side opening container dimensions
Measurement
20ft side-opening drawing reference
Outside — length × width × height
6.058m × 2.438m × 2.591m
Inside — length × width × height
5.898m × 2.287m × 2.287m
Side opening — width × height
5.702m × 2.189m
End opening — width × height
2.226m × 2.189m
Nominal internal capacity
31.1m³
An opening is smaller than the outside container dimensions. Check posts, thresholds, door movement and working space on a drawing for the unit you are buying.
Questions about 20ft side access
Can I use the end doors as well on a 20ft side-opening container?
The drawing example has an end opening as well as side doors. Confirm both on the model offered. If you will wheel small items in through the end, include room for that approach when you pick the final position.