Back to catalogue

CONTAINER AVENUE / Project guides

Inspect a used shipping container before buying

Inspect the actual container, not just the grade or catalogue picture. Record defects against your storage needs and have doubtful damage or specialist uses professionally assessed before buying.

What to check before viewing a used container

List the essentials: rain protection, usable doors, sound flooring, cleanliness and required equipment. Separate these from cosmetic preferences. For heavy machinery, vehicle entry or a conversion, ask for checks specific to that project.

Check that the photos and documents match the right container

Match the container number across the offer, dated photos and documents. Record equipment, inspections and repairs included. For a return to shipping, have the CSC and examination documents checked separately; they do not establish cleanliness or suitability for a workspace.

  • A photo where the container number is readable.
  • Recent photos of the sides, doors, and interior.
  • A list of known defects and repairs.
  • A list of included equipment and tests to plan.
  • The inspection documents needed for what you intend to do with it.

Look at the outside without taking risks

From safe positions on the ground, look for deformation, cracks, tears and repairs in the walls, corners and posts. Photograph each concern close up and in a wider view.

Look at the outside without taking risks. 1: Structure. 2: Doors and mechanisms. 3: Floor.

Visual reference

  1. Structure
  2. Doors and mechanisms
  3. Floor

Illustrative diagram, not to scale.

Have significant corrosion or uncertain repairs assessed. Ask for properly obtained roof and underside photos; do not climb on the container or crawl underneath it.

Inspect the doors, interior and floor safely

Have the doors fully opened and closed. Check handles, locking bars, hinges and seals, with the unit properly supported. Rubbing or a misaligned mechanism needs an explanation.

Enter only when safe and authorised. Report residues, unusual smells, treatment markings or unknown previous contents; smell does not establish safe air. If in doubt, remain outside. Never be locked inside for a daylight test, which would not establish watertightness anyway.

View the floor and joints for holes, separation, stains and water marks from a safe position. Do not load a doubtful area as a test. Have cleanliness and previous use assessed for sensitive goods or occupancy.

Decide what to do about each defect

For each defect, note its location, evidence and next step: accept, explain, repair or inspect professionally. Agree the repair and how its result will be checked. Resolve significant unknowns before deciding on a low price.

What to ask after you spot a defect?
ObservationPhotos and information to keepTo check before buying
Scratch or dent considered cosmeticWide view and detail of the areaCheck that the defect does not spoil the appearance you want or affect how you plan to use the container.
Corrosion with loss of material or doubtful jointLocation and photos, without destructive testingHave it checked by a professional or choose another container
Hard-to-open door or worn sealHow the door opens and closes, and the condition of its partsIdentify the cause, plan the repair, and check the result
Water stain, residue, or unexplained odourThe affected area and any known past uses or incidentsHave the cause checked before you decide the container is watertight or clean.
Missing document or identificationList of missing informationGet the missing information before confirming that the container meets your needs.

Do the checks remotely

Request views of every side and close-ups of defects. A continuous door and interior video can clarify operation, but does not replace a structural inspection. Have declared defects recorded in the offer; arrange a visit or inspection when the evidence is insufficient.

Check the container on delivery

Keep the offer, photos and messages ready. After unloading, approach when the operator permits and compare the number, condition, repairs and equipment. Check doors on the final supports without forcing them.

Photograph and report differences under the agreed terms. Investigate sticking doors and the installation before deciding their cause.

Checklist to keep for purchase and delivery

  • Actual unit number matches photos and offer.
  • Required use and acceptable wear defined.
  • Exterior, doors and floor viewed safely.
  • Unknown damage, residues or specialist uses assessed.
  • Repairs, equipment and checks recorded in writing.
  • Evidence ready for receipt.

Find the right type of container

Containers to compare

Models available from our partner sellers. Indicative prices exclude VAT, transport, and unloading. The images show the models: ask for recent photos of the container you are buying.

Technical references

Key points

  • Match recent photos and the offer to the container number.
  • Have inaccessible or uncertain areas checked by a suitably equipped professional.
  • Record defects, agreed repairs and the handover arrangements.