Start the inspection with the container number. A clean photo of a similar box won’t help you decide what to accept. Work from recent pictures or a walk-through of the actual unit, then put the repairs and acceptance terms in writing.
Decide what a defect would change for you
If you store boxes, water entry may be your first concern. If the contents roll in and out, make the floor, threshold and door movement the priorities. If it goes on a truck or ship afterward, arrange the condition and document checks for that move.
Tie all photos and records to the container number
Ask for an image of the container number and a dated photo set. If the seller assigns the unit later, agree when you’ll see the exact photos and what happens if the assigned box differs from the offer.
Look around the outside from safe positions
Walk the sides and both ends where the yard allows. Ask the yard to photograph the roof, underside or any high area that you can’t safely see. Watch for holes, cracks, significant damage at corners or repairs around seams and door frames.
Visual reference
- Structure
- Doors and mechanisms
- Floor
Illustrative diagram, not to scale.
Ask to see the doors, threshold and entire floor
Have the seller work both doors and show where the bars latch. Look at the lower seals and any gaps. Use a continuous view from the doorway to the far end to find soft areas, raised patches or signs of water entry.
Give each defect an action
Write down which wear you accept, which work the seller will finish and which issue needs a specialist or carrier review. A paint blemish, a leak and a damaged lifting point call for different decisions.
Request a live walk-through if you buy remotely
Have the seller show the number, then move the camera from the outside to the inside with the doors opening and closing. Ask for a pause at each marked repair and a still photo you can save with the quote.
Use the same checks when it arrives
After safe placement, match the number and inspect the points you saved. Document any differences and use the reporting process in the offer. If a door binds after placement, ask the carrier to check support as well as comparing the earlier video.
Record for a used-unit inspection
- Container number and current photos.
- Doors, seals, floor and repairs, with areas of concern marked.
- Written acceptance terms and contact for delivery issues.
Find the right type of container
Containers to compare
Estimates in USD before applicable sales tax, delivery and unloading. The seller confirms taxes and the complete price for your delivery address.

CA-10-STANDARD-A-BLUE
10ft Standard container · Used · excellent condition · Blue
Used · excellent condition / Blue
$2,530Before applicable sales tax
Request a quote
CA-20-STANDARD-A-BLUE
20ft Standard container · Used · excellent condition · Blue
Used · excellent condition / Blue
$1,600Before applicable sales tax
Request a quote
CA-40-STANDARD-A-BLUE
40ft Standard container · Used · excellent condition · Blue
Used · excellent condition / Blue
$2,100Before applicable sales tax
Request a quotePractical questions
Can I buy a used container if I can’t visit the yard?
Ask for a live or dated walk-through tied to the unit number and a quote spelling out repairs and acceptance. If the seller assigns a unit later, agree how you approve it before dispatch.
Does a valid-looking safety plate tell me the box is watertight?
For storage, ask for the seller’s specific weather checks and terms. For freight, have the forwarder verify the unit’s approval and current examination details. These checks answer separate buying questions.
Technical references
- Boxhub guide to container condition
Examples of typical wear and seller grade descriptions.
- IMO Convention for Safe Containers
Approval and examination used for freight decisions.