CONTAINER AVENUE / Catalog

40ft double-door shipping containers for sale

Models: 4Estimate from $2,280 Before applicable sales tax

A 40ft container with doors at both ends can serve two work areas from one pad. Picture what goes in and comes out at each end before choosing this layout.

40FT DOUBLE DOOR

Models to compare

Estimates in USD before applicable sales tax, delivery and unloading. The seller confirms taxes and the complete price for your delivery address.

Your budgetUSD · Before applicable sales tax

Container price per unit, excluding delivery.

4 products·United States
Illustration — ask for photos of the actual container

1–4 of 4 products

Back to filters

1–4 of 4 products

Back to filters

Use two ends to avoid moving 40ft of stock

For shared inventory, give each crew an entrance and keep a clear central lane if people need to cross between sides. For stock that should stay separate, mark a physical boundary on your layout and measure the room each team needs at its doors.

Check both ends of the pad before delivery

Measure the space behind each end for door swing and for the longest item you’ll load. Check parking and traffic at the far end on a working day. If that end is normally blocked by a trailer, decide where it will move before ordering.

Project guides

How to choose an open side shipping container

40ft standard-height Double Door: drawing example

A manufacturer’s preliminary information drawing gives these reference measurements. Confirm a drawing and measurements for the actual unit offered.

40ft standard-height Double Door: drawing example
Measurement40ft Double Door drawing reference
Outside — length × width × height12.192m × 2.438m × 2.591m
Inside — length × width × height11.970m × 2.350m × 2.369m
Opening at each end — width × height2.340m × 2.260m
Nominal internal capacity66.6m³

This is a configuration example, not an inspection or specification of the seller’s unit. Allow for both door sets, the handling route and any fitted partitions.

40ft double-door buying questions

Can I roll equipment straight through?

Measure both clear openings, the threshold at each end and the turn to exit. If you’ll move heavy equipment through it, have the supplier check its floor and the loading method for that specific unit.