Back to catalog

CONTAINER AVENUE / Project guides

20ft shipping container dimensions

See the dimensions

External dimensions

External dimensions
Size and typeExternal lengthExternal widthExternal heightExternal footprint
20′ Standard19 ft 11 in8 ft8 ft 6 in159 sq ft
20′ High Cube19 ft 11 in8 ft9 ft 6 in159 sq ft

These external dimensions are for reference. Check the container's measurements before buying. The external footprint is length × width, without the space needed to open the doors or maneuver. This calculation does not give the storage space inside.

A standard 20ft dry container is roughly 20 ft long, 8 ft wide and 8 ft 6 in high on the outside. Inside you have about 19 ft 4 in of length in the fleet example below. The doorway is the first measurement to check for wheeled equipment.

20ft standard container dimensions inside and out

Use the outside measurements for the pad, the inside measurements for the storage layout, and the door opening for the move. The fleet measurements are approximate when rounded to the nearest inch.

20ft standard container dimensions inside and out. 1: External dimensions. 2: Internal space. 3: Door clearance.

Visual reference

  1. External dimensions
  2. Internal space
  3. Door clearance

Illustrative diagram, not to scale.

Example 20ft standard dry container
MeasurementApproximate size
Nominal outside20 ft × 8 ft × 8 ft 6 in
Inside19 ft 4 in × 7 ft 9 in × 7 ft 10 in
Door opening7 ft 8 in wide × 7 ft 6 in high
Inside floor area149 sq ft
Inside volume1,172 cu ft

Measure the item as it will pass through the doors

Use the loaded height on the cart, skid or wheels you plan to use. Include handles and packaging. If the equipment comes up a ramp, check its angle through the doorway, including the threshold and the lowest point at the top.

Set shelves back from the entrance

Draw the largest object with an outline showing where you need to stand or turn. A shelf running right up to the door can leave enough storage area but too little room to steer a mower or hand truck inside.

Use floor area and retrieval space to plan capacity

A 24-inch-deep shelf running down one side of the fleet example leaves just under 5 ft 9 in between that shelf and the opposite wall, before accounting for supports, overhang or stock. Use that clear width to see whether you can move your equipment past the shelf.

Check whether extra height or a different door helps

A 20ft High Cube typically has the same nominal footprint and is 9 ft 6 in tall outside. If the difficulty is turning a long workbench into the end doors, compare side access and ask for the clear side opening.

Mark more than a 20-by-8-foot rectangle

Leave room for the cargo doors to swing, space to pull out the longest item and the carrier’s unloading route. Measure from the actual fence, garage edge or other fixed limit where these clearances matter.

Measure these before choosing the model

  • The largest load in the position it will be moved.
  • Clear door width and height on the offered unit.
  • Shelf depth, aisle and space beyond the doors.

See matching models

Containers to compare

Estimates in USD before applicable sales tax, delivery and unloading. The seller confirms taxes and the complete price for your delivery address.

Frequently asked questions

Will a 20-foot beam fit in a 20ft container?

A typical 20ft dry container has less than 20 feet of clear inside length. Measure the beam with its packaging and get the clear length to the closed doors before committing.

How wide is a 20ft container inside?

The standard fleet example is about 7 ft 9 in wide. Get the exact clear width where the load will sit, including any liners, fittings or repairs.

Technical references

Key points

  • The 20ft name refers to nominal outside length.
  • A doorway can be shorter than the ceiling inside.
  • Measure the loading angle and door swing if the fit is tight.