Back to catalog

CONTAINER AVENUE / Project guides

40ft shipping container dimensions

See the dimensions

External dimensions

External dimensions
Size and typeExternal lengthExternal widthExternal heightExternal footprint
40′ Standard40 ft8 ft8 ft 6 in320 sq ft
40′ High Cube40 ft8 ft9 ft 6 in320 sq ft

These external dimensions are for reference. Check the container's measurements before buying. The external footprint is length × width, without the space needed to open the doors or maneuver. This calculation does not give the storage space inside.

A 40ft dry container is nominally 40 ft long and 8 ft wide. In the fleet examples below, the standard and High Cube both have about 39 ft 6 in of inside length. The High Cube buys headroom, which matters when the load is taller than the standard doors.

40ft standard and High Cube dimensions

These examples show the same nominal floor footprint with two heights. Use the offered unit’s measurements for a tight fit.

40ft standard and High Cube dimensions. 1: External dimensions. 2: Internal space. 3: Door clearance.

Visual reference

  1. External dimensions
  2. Internal space
  3. Door clearance

Illustrative diagram, not to scale.

Example 40ft dry containers
MeasurementStandardHigh Cube
Nominal outside height8 ft 6 in9 ft 6 in
Inside length39 ft 6 in39 ft 6 in
Inside width7 ft 9 in7 ft 9 in
Inside height7 ft 10 in8 ft 10 in
Door opening7 ft 8 in × 7 ft 6 in7 ft 8 in × 8 ft 6 in
Inside volume2,390 cu ft2,694 cu ft

Use the floor area you can actually reach

The inside footprint in these examples is about 305 sq ft. Start your plan with a straight loading route and a place at the doors to set down goods temporarily. Reserve space for stock you need to take out without moving the pieces in front of it.

Check long stock with the doors shut

Measure a beam, pipe bundle or trailer attachment from its longest points. Add packing and space for handling. Then check the clear length with the doors closed and the straight approach outside the doorway.

Choose headroom where it changes the layout

The extra foot of outside height helps when taller stock clears the High Cube doors or when the extra space above racks is usable. Measure any lifting platform and the load together before choosing the taller box.

Test two pallet widths on paper

Put the two widest loads side by side on your layout, including wrap and overhang. Then trace how each one gets to that spot. Two pallets can fit once parked yet leave too little room to place or retrieve them.

Allow for the truck as well as the doors

Mark which end needs clear access and where a long truck must turn or straighten out. If you are comparing Standard and High Cube, show the carrier the overhead obstructions on the approach and at the drop spot.

Measurements to confirm on the exact 40ft

  • Inside length to closed doors.
  • Doorway width and clear height with the load ready to move.
  • Exterior height, unloading route and working space at the door end.

See matching models

Containers to compare

Estimates in USD before applicable sales tax, delivery and unloading. The seller confirms taxes and the complete price for your delivery address.

Frequently asked questions

Will a 40ft High Cube give me more floor length?

The reference Standard and High Cube have the same inside length. Check the actual model for small differences. The main benefit of High Cube is its added height.

Can I load a 40-foot pipe through the end doors?

A typical 40ft dry container has less than 40 feet of inside length. Ask for the clear length with the doors closed and consider the room needed to move the pipe in.

Technical references

Key points

  • Standard and High Cube have similar usable floor area.
  • Use the door height and inside length for the load itself.
  • Allow room to handle and pull out long goods.