
40ft High Cube container · Used · excellent condition
Used · excellent conditionPreferred color: Blue, Green, Gray, Beige
Reference: CA-40-HIGH-CUBE-A
Guide estimate from$2,550before taxes
View containerDelivery and unloading quoted separately
CONTAINER AVENUE / Catalog
Models: 28Estimate from $1,370 Before applicable sales tax
A 40ft container gives you one long space for lumber, work equipment or several bays of inventory. Compare door layouts and heights before choosing where it will go.
40FT RANGE
Estimates in USD before applicable sales tax, delivery and unloading. The seller confirms taxes and the complete price for your delivery address.
Search by size, type, condition, color or reference. Use arrows for suggestions, Enter to select, Escape to close.
Your budgetUSD · Before applicable sales tax
Container price per unit, excluding delivery.
25–28 of 28 products
Back to filters
Used · excellent conditionPreferred color: Blue, Green, Gray, Beige
Reference: CA-40-HIGH-CUBE-A
Guide estimate from$2,550before taxes
View containerDelivery and unloading quoted separately

Used · good conditionPreferred color: Blue, Green, Gray, Beige
Reference: CA-40-DOUBLE-DOOR-B
Guide estimate from$2,840before taxes
View containerDelivery and unloading quoted separately

Used · good conditionPreferred color: Blue, Green, Gray, Beige
Reference: CA-40-OPEN-SIDE-B
Guide estimate from$5,340before taxes
View containerDelivery and unloading quoted separately

Used · last tripPreferred color: Blue, Green, Gray, Beige
Reference: CA-40-OFFICE-C
Guide estimate from$9,670before taxes
View containerDelivery and unloading quoted separately
25–28 of 28 products
Back to filtersA standard 40ft is typically 8 ft 6 in high on the outside. A 40ft High Cube is typically 9 ft 6 in. If your load is close to the door height, compare the clear opening on the exact units. For a low entrance or utility lines, have the carrier check the total height of the loaded truck.
Use a 40ft when you need an uninterrupted run for long material. If tools and inventory go to different crews, two 20ft units let you put storage closer to each crew. Sketch both layouts with the doors open. For a long single unit, plan a clear path to the back or compare access from both ends.
Walk the route from the road to the drop spot. Look at the sharpest turn with cars and equipment in their usual places. Give the carrier photos of that turn and the proposed spot for unloading. Ask where its truck will straighten out, pull forward and turn to leave.
These are dry-container examples. They do not describe refrigerated, office or other fitted models.
| Measurement | Standard 40ft dry | 40ft dry High Cube |
|---|---|---|
| Outside — length × width × height | 12.192m × 2.438m × 2.591m | 12.192m × 2.438m × 2.896m |
| Inside — length × width × height | 12.032m × 2.352m × 2.395m | 12.032m × 2.350m × 2.700m |
| Door opening — width × height | 2.340m × 2.292m | 2.340m × 2.597m |
| Nominal internal capacity | 67.7m³ | 76.3m³ |
| Ground footprint, excluding access | About 29.7m² | About 29.7m² |
Allow for shelving, an aisle and the shape of your goods when planning what will fit. Check the measurements of the actual unit, and allow space for doors and delivery.
A typical 40ft dry container has less than 40 feet of usable interior length. Measure the pipe as bundled and ask the seller for the clear length with the doors closed. If you’re loading long bundles by forklift, confirm the door opening and loading plan.
Send the carrier a sketch showing the bend, the straight space after it and the surface at the drop site. If a tilt-bed can’t work there, ask whether the carrier can quote a different unloading setup for the site.